Master's Halo's "Integration" Han Dao-Kuo D2 Steel Survival Straight Knife Trial Experience

Wilderness survival may be unfamiliar to many people. When living in the wilderness and survival, for most people, it only exists in the “Wilderness Survival” section of the Discovery Channel, and for the one who is in the wild Bear Grylls, who is incapable of being, is also a big God-level image in my heart that is obsessed with geometry. What fascinated me even more was his straight knife. Although according to different living conditions, Bell also made targeted changes in the selection of tools. However, his most frequently used Bell survival knife has always been The yearning in my heart.

Handaloker's outdoor straight knife, let me see in it, the wilderness to survive Gore straight knife. It can be said that the spokesperson is a derivative version of the domestic Bell, and this knife is not surprisingly a very localized derivative. Experienced this straight knife is also quite annoyed to me, manufacturers in the sales copy, but the use of the so-called Asian survivor of the famous Xiaoqiang classmate model, a series of function display tool, can be described as a standardized experience template. Since the advantages of functional manufacturers have already listed a basket, let us play an experience for everyone to find.

The details of the part Hanhan Daoluo as a model, Asia's outdoor gods involved in the design of a tool, I would like to be sloppy in details, after all, the wilderness to survive can not be sloppy, the manufacturers introduce the page in the prestige of this straight knife Survival pictures in the wild made me feel like the illusion of a straight knife. Therefore, this tool will inevitably bring a layer of Asian Bell soul blessing. However, a countryman must use a name in English to engrave a medal, let me look quite Why?

Fortunately, Han Dao did not forget the fact that he had engraved the “Han Dao” label on the tool, which was made by the Chinese people. It was also a joy to see that the knife was used to identify the functional use and the material of the blade, so that the functionality was clear at a glance.

Luhan Doo Locke can be described as a national label, outdoor masters plus blessing orthodox outdoor tools, I think that since there is this outdoor survival experience to participate in the design of a tool, of course, will not allow love to disappoint the survival partner, so I cast this tool With halo eyes, however, this aura has not escaped the shadow of Bell's straight knife after all. Perhaps the orthodox outdoor master's survival needs are the same. Han Dao-lok uses a clean and simple design. The weight of the entire knife is about 250g. The one-handed grip feels moderate and the overall balance of the knife is balanced.

Yaohan Daoluo has its own scabbard, and the scabbard is designed with the functions of flint and whetstone. This kind of hard scabbard has a good fit with the tool. However, there is still much room for improvement in the details and it can be polished.

☟ This straight knife has a total length of 22 cm and a blade part of 8 cm. The blade steel uses one D2 material, and the surface is plated with titanium. The shank is fixed with G10 in compliance with the fiber bolts. The blade part is designed with a flint scratch, and the thumb fixed force is designed.

The most direct function of a straight knife must be the cutting brought by the cutting edge. Generally, the design of the cutting edge can not be separated from several factors, such as the knife's abdomen and angle, the thickness of the cutting edge, the shape of the cutting edge and the grinding method of the cutting edge. The knife tip adopts a drop-like design. The thickness of the blade is suitable for outdoor use. The edge cutting method also combines strength and sharpness for outdoor use.

☟ After seeing the blade, look at the tool holder again. The tool holder has a two-piece fit. The G10 composite material is used for the material. The material has better anti-slip performance. The arc design of the handle is more suitable for the palm joints. A non-slip groove is designed at the site to increase the fastening effect for the binding of the tool.

☟ For this knife, not throw away the essence of the design of the outdoor straight knife, scabbard is a bright spot, but this is a lot of domestic product trough transplanted, this will be used in the back will focus on introduction, first look at Han Road design of this hard scabbard, known as the K sheath, scabbard hanging point for the penetration structure, the front side of the use of rivets fixed Flint, compared with the old models to get this deeper insertion, and Flint The magnesium handle is slightly thicker.

☟ Flintstone can be used with blade back scraper position, and Han Dolok reserved a flint scratch

One side of the fixed Flint stone rivets, the edge of the scabbard is inlaid with sharpening stones, the material is corundum, and the corundum roughness can smoothly grind the cutting edge in the outdoor environment.

Luhan Doo Locke designed in details, not sloppy, in addition to the details I mentioned above, this domestic and outdoor straight knife undoubtedly joined the tactical rope hole, hard tail hammer function design.

From the practical point of view, from the point of view of evaluation, the Handao factory sales page gives a complete display of functions, so I will talk about the design of several points of concern in use, as an outdoor tool, wearing practical performance must be my Concern, so look at the original Han Road with this K-sheath, wearing on me to bring a very bad feeling, this scabbard to wear the way to use the belt with the jack, but the hole in the hard material to connect the gap on the gap It's hard to get stuffed and you can't wear a cobra belt.

This scabbard itself is based on a hard material fixed tool, a certain force must be applied to the process of insertion and extraction, the fastening force must be used to complete the force of the two-hand insertion process, not to mention fixed in the gap on the belt, It can be imagined that it is very difficult to draw a knife. If one-handed operation requires the use of the index finger against the scabbard in order to successfully produce a knife, this method greatly increases the safety risk of the finger, and can only be pulled out with the help of both hands.

This gap does not have a great impact on the blade, because the downward force just offsets the looseness of the gap. No matter if the backhand is on the backhand, the inserting knife is more than adequate.

Hard scabbard fixation has another effect. In the process of diarrhea or jungle crossing, due to the hard connection, the knife is difficult to rotate freely on the side of the body, resulting in a certain pressure on the body. It is recommended that manufacturers use it instead. Rotate the angle jack design and adjust the jack position.

☟ ☟ 不 不 不 不 不 不 不 不 不 不 不 不 不 不 不 不 不 氓 氓 氓 氓 氓 氓 氓 氓 泰国 泰国 泰国 泰国 泰国 泰国 泰国 主流 主流 主流 主流 主流 主流 主流 主流 主流 主流 主流 主流 主流 主流 主流 主流 主流What is the highlight of innovation, the tool is to seize this highlight, the use of D2 steel, and according to my personal knowledge, D2 steel in the academic name has the same chemical composition, heat treatment and other process differences. Excellent technical D2 steel is mostly produced in the United States, with high wear resistance and toughness. In the actual simulation of excavation and earth-finding tests by Han Dolok, soil was mixed with gravel in the woods, and after excavation, it was found that the edge of the blade had a slight roll edge.

Thanks to the sharpening stone design, in order to not affect the follow-up experience, it is really convenient to use sharpening stones decisively. However, when the sharpening stones are worn out, there is a hidden danger of friction when wearing them.

After grinding the blade, it has no influence on the cutting of fresh bamboo, the penetration of trees, or the scraping of velvet crumbs by cutting blades, and it can satisfy the use of bamboo-wood mixed forest belts in East China.

For a long time, it has been questioned whether the high-temperature spark will cause some damage to the blade surface. It can be seen that after the scraping of the Flint, the surface of the tool does form an oxidized surface, but after tactics After the gloves are rubbed, the oxide surface can be removed. I think this also benefits from the use of the titanium plating process.

However, in actual use, cutting hard hardwood brings me some trouble. Due to the design of the straight knife blade for outdoor survival, the cutting force is limited to the length of the blade, hardwood knife is not very deep.

☟ During the use of this tool, a detailed design can be said to give a good feeling of use during the cutting process of the cutting tool. It is the position of the thumb on the back of the blade. In use, the strength of the thumb can be used to concentrate the force. Cut objects to increase the damage surface.

After writing

Experience such a tool, the Asian outdoor master's halo makes me feel the pressure, such a product that incorporates the needs of the domestic use of outdoor tools, the use of domestic derivatives, to make certain changes in the use of materials, tool details to meet the needs of the design However, the so-called design has a shadow on the world's outdoor master cutter, perhaps this is the embodiment of the Asian outdoor masters inherited from the Bell training camp. However, this tool in the scabbard's innovation only pays attention to the appearance of the upgrade, and ignoring the internal needs of the use, it is actually a bit embarrassing, such an incomplete experience report does not cover the essence of this tool, but this experience Let me have a new understanding of the manufacture of the Chinese people, integration through this path is passable, but the integration of innovation for the manufacture of the country is also lacking a kind of pragmatic spirit, I think this helpless in the body of Han Tao was magnified. It is hoped that the outdoor masters in Asia will respect the outdoors and influence the Chinese people in the same way.

PC Luggage

This is travel factory PC luggage for men, which is more durable than ABS with a little PC. The surface material of the men's luggage is 100%PC, not easy to peel and break. The wheel of business suitcase is 360 degrees universal double wheels design for rolling smoothly. The Tie rod still uses the solid aluminum alloy tie Rod. This plastic is unique as it is lighter than most aluminum travel luggage, is scratch resistant, and is less likely to crack during travel. It is also big capacity for putting more things.

Pc Luggage,Vintage Suitcase,Travel Luggage,Custom Luggage, luggage to travel, luggage and travel bags, luggage box, luggage with wheels,luggage to travel, luggage to travel

Zhejiang Yinglin Luggage Co. Ltd , https://www.yllcluggages.com