Showers are used very widely in our daily lives, and it is almost everyone’s pleasure to go home from work every day for a relaxing shower. Then, in daily use, the shower will have some damage after it is used improperly and after a long period of use. Therefore, the maintenance and cleaning of showers are knowledge that everyone should know. Today Xiao Bian came to explain it to everyone. First, the maintenance of shower 1, the use of ambient temperature can not exceed 70 degrees Celsius, high temperature and ultraviolet light will greatly accelerate the shower of aging, shorten the service life of the shower, so shower installation as far as possible from the bathroom heater and other electrical heat source. Shower can not be installed directly under the Yuba, and the distance should be more than 60CM. 2. In areas where the water quality is hard, please try to use shower heads with gel particles or with a straight cleaning device. Even if the shower outlet holes are clogged with scale, it is easier to clean. Remember not to dismantle the shower by force. Due to the complex internal structure of the shower, unskilled disassembly will result in the shower not being restored. 3, switch the shower faucet and adjust the shower outlet mode, do not use too much force, homeopathic gently turn. Even a traditional faucet does not require much effort. Take special care not to use the handle or shower bracket as a handrail to support or use. 4. The metal hose of the shower head should be kept in a natural stretch, and should not be coiled on the faucet when not in use. At the same time, be careful not to form a dead angle at the joint of the hose and the faucet so as not to break or damage the hose. 5, every six months or less, the shower is removed and placed in a small basin, with the consumption of white vinegar on the shower surface and internal watering and soak 4-6 hours, and then gently wipe the shower surface with a cotton rag At the mouth: After the connector is reinstalled, the water is turned on for a while until the white vinegar and scale flow out with the water, so as to eliminate or reduce the influence of the scale on the shower and to provide a certain sterilization effect. Second, shower cleaning tips 1, wall-mounted shower faucets are generally more prominent, so be careful not to bump or press it when you put items. Avoid contact with hard objects such as rings as much as possible to avoid fatal injuries. 2. The ideal cleaning technique is to rinse the faucet with clean water, and then use a soft cotton cloth to wipe off any moisture on the metal surface of the faucet, as water will volatilize and form scale on the metal surface. Wipe gently and do not rub it vigorously. Drying with a moistened sponge and a soft leather can make the faucet brilliance. 3. If a large amount of cleaning work is required, it is best to use a mild liquid glass cleaner, or an acid-free, non-abrasive, mild liquid and fully dissolved powder. The frictionless solution polish removes the thick mask on the faucet and Accumulation, do not use any abrasive cleaners, cloth or paper, and any acid-containing cleaners, abrasives, or rough cleaners. After cleaning is complete, remove all lotion with water and dry it with a soft cotton cloth. <\p><\div> Toothpaste Tube,Empty Toothpaste Tubes,Aluminum Toothpaste Tube,Biodegradable Toothpaste Tube Guangzhou China Han Oral Products Co., Ltd. , https://www.gzchinahan.com
Shower maintenance and cleaning tips