Laboratory Construction--Laboratory Space Scale Planning 1. Planning and design of product layout: Provide professional advice for the use department, design product layout plan that meets laboratory standards and usage requirements. Determine the type, size, and quantity of products in the laboratory to meet laboratory requirements and standards. 2. Design of reserved location for hydropower: After the layout is determined, the construction company will provide a comprehensive hydropower location map and hand over the project to the customer. 3. Design of the exhaust ventilation system: In the new construction or renovation project of the laboratory, a complete ventilation scheme is designed according to the number of ventilation carriers in the laboratory. The content of the scheme includes the position and size of the tube well reserved for exhaust in the building. Distribution and specifications. Ensure that the wind speed, exhaust volume and noise when using the ventilated carrier meet the national standards, and do not wrap with the air conditioning, fire protection, lighting and other lines in the building. 4. Product personality design: According to the experimental process and the special requirements of personnel, adjust the product structure and function, and design a personalized product to meet the requirements of users. 5, the design of safety facilities: in accordance with international standards, in the laboratory configuration safety cabinets, cabinets and emergency showers, emergency eye wash and other safety design. The main features of the laboratory building are numerous experimental contents, complicated process requirements, and many engineering pipe networks. The construction cost is double or several times higher than that of ordinary buildings. According to these characteristics, in addition to following the general design principles of flat design, the experimental building graphic design also needs to follow the following principles: A. Similar laboratories are combined. B. The laboratories with more engineering network are combined. C. The laboratories with vibration isolation requirements are combined and generally should be located on the bottom layer. D. Laboratories with clean requirements are combined. E. Laboratories with radiation protection requirements are combined. F. Laboratories with toxic substances are combined. Hydraulic Style Chafing Dish,Chafing Dish,Chafing Pans,Chafing Set Jiangmen Junerte Stainless Steel Kitchenware Co.,Ltd , https://www.jmjetkitchenware.com
Laboratory Construction--Laboratory Space Scale Planning