What should I do if I use a vacuum packing machine and I get a bad pump?

Vacuum pumping machine pumping bad how to solve? Vacuum packaging machine is a necessary packaging machine for many companies. When we use vacuum packaging machine, we often encounter some problems. Sometimes we find that some products after vacuuming are not completely vacuumed. The vacuum effect is not good. At this time, many people are anxious about how to solve it. How can such a problem be solved in the end? In fact, do not panic, as long as a bit of knowledge on this area is easy to solve, and today Wuhan Dongtai packaging machine to introduce you a few points, I hope that in the face of such problems, how can I help you: Wuhan Dongtai Consulting QQ

First, in the case that the vacuum packaging machine does not pump well, note whether the air pipe is leaking, whether the solenoid valve is leaking, whether the vacuum pump is damaged or if it is lack of maintenance.

Secondly, we must consider the machine itself to see if there is any mistake in the machine itself. If it is an error in the machine itself, we must repair the machine.

Third, when the normal operation of the vacuum packaging machine, the vacuum gauge, and the computer board time adjustment are all normal, but after the vacuum is applied, the air in the vacuum bag is not removed. What is going on? After inspection by the staff, it was found that when the product was placed, the length of the vacuum bag mouth was too long to cause the vacuum cover to press down and pull down, and the seal was pressed on the mouth of the bag, so that when the vacuum was applied, it could not be cleaned. . News source: http://