Description :
Our Feather Flags is one kind of Beach Flags
.Its shape like Knife or Feather ,or Aero ,Blade ,Mistral or Sirocco .
Our common material for feather flags is
100% 110 g or 135 g knitted fabric with digital printing or dye sublimation
printing . Single side printing or double sides printing .
Our feather flags are supplied with a
choice of bases, making them extremely versatile and easy to install ,in any
position. Base choices include: water holding base ( for indoor or outdoor use ),
ground stake ( for outdoor soft ground use) or a drive - on car foot ( for outdoor
use on hard ground ).
Size list of our feather flags :
Glass Fibre Poles + Aluminum
Poles
Rod
total height
2.8
meter (9.2feet )
3.4meter
(11.1feet )
4.5meter(14.77feet
)
5.5meter
(18.0feet )
Flag
size
50*200cm
60*240cm
70*340cm
80*410cm
Vertical
Height
260cm
300cm
400cm
500cm
Glass Fibre
Rods
Rod
total height
300CM
(9.84 feet)
400CM
(13.13ft)
500cm
(16.4 feet)
Flag
size
65*210cm
75*320cm
80*420
cm
Vertical
Height from floor
280cm
360cm
450cm
Our Feather Flag Shape :
1.
Feather Flag Convex
2.
Feather Flag Straight
3.
Feather Flags Concave :
The difference
between glass fibre poles + aluminum poles and full glass fibre rods :
The first one ,just the top part pole is gass fibre ,so
it can be bent
The second one is full glass fibre rods from bottom to
top .This quality is much better ,because this material is soft and can be bent
The printing
tech for our feather flags :
1) Digital printing
2) Dye sublimation printing ( hot transfer printing )
--- this quality is much better than digital printing
The base for
our feather flags to choose :
Feather Flag Feather Flags,Feather Banners,Feather Flag Banners,Feather Banner Flags Golden Mouth Advertising (H.K)Co.,Ltd. ( Jie Da Advertisement Co.,Ltd) , https://www.advertisingflagbanners.com
For final price with complete accessories ,please contact with Angelina
(whatsapp : 0086 13427921037 )
How to deal with milk samples in ELISA kit experiment?
How to deal with milk samples in ELISA kit experiment? Method 1: Take 10ml of milk into a centrifuge tube, add 10ml of ethyl acetate, sonicate for 30min, then centrifuge at 4000g for 10min (if an emulsified layer appears between the two phases, place the sample bottle in a water bath at 80 ℃ for about 5min, then Centrifugation) Pipette 1ml of ethyl acetate layer into another test tube, evaporate to dryness under a nitrogen stream at 60 ° C. The residue is buffered with 2ml of buffer solution and used. The pretreatment process takes about 2 hours. ◇◇ For specific content, welcome to enter and click to download for free!