How to maintain the radiator

Nowadays, many families use radiators in the winter, but after the whole winter, the radiators will accumulate certain dirt both in appearance and inside. If not cleaned in time, it will cause damage to the radiator and affect its use. In particular, if the scale is accumulated inside, it is also very healthy. Today we will take a look at how to clean the radiator and how to maintain it.

Radiator cleaning method

First, the surface is clean

First of all, we have to clean the surface of the radiator. After all, if the surface is dusty, it will affect the appearance. The cleaning of the new radiator is very simple, and it is as clean as a clean wipe with a clean damp cloth or a freely bendable tweezers. Of course, if you want to use water, it is okay not to soil the floor, but it is best to wipe it with a cloth.

Second, close the return valve

Then you can clean other parts of the radiator. Before cleaning, in order to ensure safety, be sure to turn off the return valve, and then use a wrench to gently unscrew the plug on one side of the radiator. Here, we must remind you that when the plug is gently unscrewed by hand, the radiator will flow out some water. At this time, you can use the water in the basin to wash it accordingly.

Third, rinse the radiator

When cleaning, we can use the flushing method. When opening a temperature-controlled valve, the relevant flushing is performed, and the water flowing out to the radiator is relatively clear. Once the water flowing out is clear, the temperature-controlled valve can be closed. The same measure in turn cleans the radiator in turn, after cleaning, the inlet valve is opened and the relevant exhaust is performed.

Fourth, different radiators are cleaned differently

There are a lot of radiators on the market now, we have to pay attention to different radiator cleaning methods. The steel column radiator is easy to clean, and the surface can be bright as new with a normal towel; the space between the adjacent two columns is small, and the chemical fiber " feather feather" can be used, which is flexible and long enough. It can wipe the heating gap, and the dust can not fly when the dust is wet. Just put the dip in each empty space, pull it back and forth like a saw, and rinse the tweezers with water in a timely manner. The heating can be cleaned in a while. The copper-aluminum composite heat sink has a small gap. You can use an abandoned telephone line or other thin rope with a slight hardness. One end is tied with a wet rag and the other end is passed through the hole of the radiator. Then, while shaking the rope, slowly pull the rag and repeat the heat to clean the radiator.

How to maintain the radiator

1, want the radiator to be durable, daily cleaning is very important. After a heating season, the surface of the heating pipe and the heating indoor heating pipe will inevitably have dirt in the air attached to the surface. After cleaning, wipe it with a clean rag. Do not use strong corrosive solution when wiping, or use sharp and sharp Scratch the item to avoid damaging the surface.

2. In addition to daily cleaning, the full water maintenance of the radiator is also very important. After the warmth, pay attention to the full water maintenance, especially the steel radiator, if it is not full of water, it is easy to appear oxidative corrosion. In addition, after three days of warming, you can touch some pipeline connections by hand to check whether there is water leakage at each interface. If there is water leakage, notify the maintenance personnel to help repair.

3, in addition to daily use, the radiator should also pay attention to maintenance. The heat sink should not be wrapped when it is used. This is not conducive to heat dissipation. Although it may fall into the air, it may drop some dust and debris. However, it is good to clean it frequently. The cleaning of the new radiator is very simple. Use a clean wet cloth. Wipe it a few times and it will be as clean as new.

4. Finally, always check if the radiator is working properly. After the end of the heating season, the system is subject to changes in thermal expansion and contraction. Individual heating installations and running winds may leak, etc. Users should pay attention to check whether the joints and heating running winds are loose or leaking. If there is a water leakage problem, please contact the person in charge of the heating enterprise or call the customer service hotline in time to achieve timely control and timely processing.

The way to clean and maintain the radiator is here, I hope you will be inspired after reading it. In fact, in order to have a longer service life for each type of home appliance, in addition to selecting good brands and quality products, daily cleaning and maintenance is very important, so we must take good care of our home appliances, so that we can make They are more durable.