The durable and high-quality characteristics of EPSONR210, it has formed the popularity of the market. Next, we introduce the method of handling the flashing faults. Since EPSON R210 has a complete inspection system, it often displays a flashing prompt when a fault occurs. The common faults are summarized for friends to sit in and help to quickly eliminate the fault. Symptom description: EPSON R210 ink lamp is on. The power light flashes. Symptom description: EPSON R210 paper feed lamp ink lamp flashes at the same time Solution: Check whether the ink cartridge is good, and the CD tray is closed Symptom description: After the EPSON R210 printer is turned on, the ink cart walks several times but stops without returning to the starting position. Then the paper lamp and the ink lamp flash simultaneously. Solution: If there is no continuous ink supply solution: Glide A few drops of lubricating oil are dropped on the steel shaft of the trolley. If continuous ink supply is hung: stick the ink supply tube of continuous ink supply to the inside of the printer to prevent the resulting raster problems Symptom description: EPSON R210 paper feed and ink lights flicker at the same time Solution: Clean the paper feed sensor of the printer, and the paper sensor under the printer head Symptom description: EPSON R210 paper feed lamp and ink lamp flash alternately. Clearing software used. Also decoded. Still can't solve the problem: you can remove the continuous supply system and replace it with the original ink cartridge to try. If the original ink cartridge works, it means that the problem of continuous supply may be that the chip of the ink cartridge is broken. Symptom description: EPSON R230 paper feed and ink lights flash simultaneously at the same time EPSON R230 paper feed and ink lights flash rapidly at the same time (nozzle movement) Symptom description: When the EPSON R210 is turned on, the nozzle is moved out twice, tested twice, and walked to the left and returned to the ink pump. The power light is green and everything is normal initially. Ready to print, point to print, the nozzle starts to move, the problem comes out, the paper feed light is red, the power light is green, and it prompts that the paper is not loaded correctly: close the CD / DVD wizard. Reinstall the paper, and then press the [Replace Cartridge] button on the printer or click the [Continue] button that appears on the screen. Manually remove residual jammed paper. To cancel all print jobs, click the [Cancel] button. There is no paper jam, the grating parts are not polluted, and the sensors under the nozzle are not polluted. Each sensor has checked that there is no pollution, that is, it cannot be fed into the paper for printing. Solution: If it is the problem of the paper feed sensor, blow it with a blower to remove foreign objects. If it is the problem of the nozzle sensor, you can clean the sensor under the print head. If there is no phenomenon of head collision, you can consider the aging of the paper feeding system, which may be the problem of the pickup roller. Symptom description: This machine is used to shoot posters, and the system is installed with Windows XP. Sometimes, immediately after turning on the machine, I go to the printing preferences and see that the ink cartridge is in a gray state, and sometimes it is normal and can display the remaining ink level. Once the grayscale state, the printer will definitely not print, just let it print, no response at all. Sometimes it's slap-and-slap (poster photo), and halfway through, it stops automatically. And the printer will restart after restarting. Solution: If the replacement of the ink cartridge is not recognized, it may be good. In addition, there may be a problem with the USB data cable or the contact of the connector. The original USB data cable must be replaced. Symptom description: The R210 printer is printing. After a sudden flash, it cannot print normally. The nozzle detection on the printer can print the pattern, even the computer prints, and it can also be printed in draft mode, but as long as When selecting text mode or higher mode, after paper feeding, the paper moves forward a little, then the paper feed light is on, the rear paper feed light and the power light flash together, and the computer prompts a paper jam. Solution: The machine has a paper feed action, and an error may be detected after the paper feed action, so if the light flashes, you can try to reinstall the print driver and reset all settings to the factory value. If you confirm that the machine code is wrong, you can only clear it first. Give it a try Special Tip: When adding water-based lubricant to the slider, do not add too much at a time, otherwise it is easy to scrape more lubricant into the ink sensor when the print head moves back and forth, causing human failure. Side Cabinet,modern side cabinet,sideboard,minimalist side cabinet Foshan Poesy Furniture Co., LTD. , https://www.poesy-furniture.com
Solution: The ink lamp is on. The power light flashes. Meaning, there is no ink! No ink cartridge detected. Press the ink change button! Just follow the prompts
Solution: If it is a continuous supply, it may be the reason for the continuous supply. Another problem is the sensor. This problem is generally caused by too many cleaning cycles.
The two lights flashing may be caused by the following reasons:
1. The problem of the sensor, (below the word car, behind the word car, the grating tape is not clean, the disc sensor,)
2. The light belt and the frame are not kept parallel 3. The long strip of sponge under the car sensor is not clean, as wide as A4 paper 4. The nozzle is burned. The motherboard is burned
EPSON R210 lamp flash failure and treatment