Q: Compared with CTP, what are the advantages of CTcP? Answer: 1. Use traditional PS plates that are popular all over the world, that is, ordinary plate materials with wavelengths of 350 to 450nm. The choice of printing plates is not limited by the manufacturer, and each printing plate has half the cost savings. Q: Why is the price of CTcP higher? A: The biggest advantage of CTcP is the use of ordinary PS plates for plate making. In order to achieve this function, the imaging system of CTcP equipment is much more complicated than other CTP products. To date, only basysPrint has been able to develop CTcP products, while Kodak, HP, Fujifilm, NetScreen, Agfa and other companies have only CTP products. In fact, Agfa ’s CTP products are also produced by basysPrint in an OEM manner. The price of CTcP is relatively high, but we are using traditional PS plates that are much cheaper. CTcP can save you a lot of costs in the plate and processing. Compared with users who use film or CTP before printing, CTcP is a device that saves users money. In fact, compared with many thermal CTP of the same level, our price is not high. If you already have printing equipment, then we save you investment in this area, and you do not have to worry about the expensive special potion of CTP. Because the 1-bit TIFF file format is used, your choice on rip and proofing devices is also more flexible. Q: What is the basic model of the device? Answer: You can choose the corresponding model according to the business situation of the printing plant: 5 series, four open, 15pph (single head) and 25pph (double head), manual, suitable for commercial packaging books and periodicals. About the device Q: What is the publishing speed? Answer: 5 series, 15 ～ 25pph; 6 series: 25pph; 7 series: 11 ～ 20pph; 11 series, 10 ～ 16pph. (Excluding time to change editions) Question: How did your plate-making speed come out? Answer: 50% image coverage, negative plate, 1500dpi resolution, maximum exposure area of ​​the model. Q: What is the resolution? Answer: 900, 1270 and 1500dpi. Q: How many additional network lines can you achieve? Can you add FM network? Answer: It can be added to 200 lines. With rip, a higher number of lines can be added. Our smallest pixel is only 17um large, so there is no problem with FM screening. Q: Do your machines need special environmental requirements? Answer: UV-SETTER can work normally under ordinary environment. Temperature: 18 ～ 24C; Humidity: 20 ～ 80%, no water condensation. There is no need to prepare dark room or yellow light lighting like other CTP equipment, and the daylight conditions can be. Q: How is the stability of your machine? A: Our imaging technology has been accumulated for more than + years, and we have installed thousands of units worldwide. These data have shown that our equipment is mature. Q: I heard that some other manufacturers in the market also produce direct plate-making machines for traditional plates. How does your equipment compare with them? Answer: We know these manufacturers. They may have a good concept, but I can tell you that these devices have been released in recent years. Their immature and unstable devices are not comparable to those we have developed for more than a few years. (Some information about LUSCHER, released in 2006, the price of the equipment is very high, 200 to 3 million, the speed is much lower than the publicity.) Q: The resolution of your device is only 1500dpi, which is too low. A: Our equipment can easily screen 200 lines, which can meet the needs of most printed products. With the front-end rip, our machine can output 250 to 300 lines or even higher screen lines, and can do some very demanding printing tasks. The dots output by our device are unique square dots with very sharp edges. Compared with the general CTP devices, it is difficult to control the round dots. We can reproduce the printed matter more realistically, and also allow our device to output high-quality at low resolution. Printed materials, reduce data volume and save document processing time. Although the general CTP has a high resolution, we know that there are many factors that affect the dot restoration. In addition to the pre-press image processing, it also includes many other factors, such as plate limitations, printing process control, ink control, paper, etc. So, the so-called high resolution of these devices is often difficult to achieve in the actual production process. About plates Q: Can your equipment use processing-free plates? A: Our equipment can be exposed on plate materials in the wavelength range from 360nm to 450nm, which of course includes some processing-free plates. We have also been testing some other processing-free plates. Q: Can your equipment use negative plates? Answer: Of course, our equipment can expose on the positive and negative plates. In fact, we recommend that you use a negative plate, because when you use a negative plate, you only expose it where there is an image. With 50% image coverage, the exposure speed on the negative plate is twice that of the positive plate. Q: How many CTcP plates do you recommend? A: The biggest advantage of CTcP is that it adapts to ordinary PS plates, which includes almost all plates. But the effect of use is different. We have done a lot of experiments in China and Germany. At that time, we can provide customers with experimental reports of various plates. Among them, some domestic PS version data exposed on CTcP is already better than the data provided by the German factory. Customers can make the best choice according to their own situation. About process and RIP Q: What kind of process does your machine support? Answer: All processes that can generate 1-bitTIFF format are supported by our machine. Q: What RIP does your machine use? Answer: Most of the RIP on the market can be used by our machines. For example: HARLEQUIN, AGFA TAIPAN, AGFA APOGEE, RAMPAGE and HEIDELBUR GDELTA TECHNOLOGY, etc. About the bulb Q: What is the lifespan of your light bulb? Answer: 2000 hours. The UV lamp is the only consumable for this device, and the cost equivalent to each plate is very low. Q: Why is the life of the laser head much shorter than CTP? Answer: The light source of CTP equipment is several + even hundreds of laser diodes. Although the life of individual light-emitting elements is relatively long, in fact, because of the relatively large number, the probability of damage is quite high. As far as we know, most of the CTP light source failures occur far below the actual life. In many cases, within 2000 hours, which is the life of our light bulb, it will be damaged. You need to know that for thermal CTP, the damage of a single diode will halve the performance of the entire system! A gas grill is a type of outdoor grill that uses propane or natural gas
as a fuel source to cook food. It typically has a metal cooking grate,
burners, and a hood or lid to trap heat and smoke. Gas grills are
popular because they are easy to use and offer precise temperature
control, making them ideal for grilling a variety of foods, from burgers
and hot dogs to vegetables and seafood. They can also be used
year-round, as they do not require charcoal or wood for fuel. Some gas
grills also have additional features such as side burners, rotisserie
attachments, and built-in thermometers. Gas Grill ,Portable Propane Grill,Char Broil Bbq,Small Propane Grill NingBo AoYue Technology Co., Ltd. , https://www.aoyue-tech.com
2. Besin provides a series of products with all plate specifications.
3. The stability of the equipment operation is very good.
4. The equipment can be applied to various working environments without yellow light dark room, and the requirements for temperature and humidity are not high.
5. The equipment workflow is simple and convenient. CTcP is very suitable for customers who upgrade from traditional plate making to computer plate making. The original pre-press investment of customers will not be wasted. For example, the 1-bitTIFF file format used by CTcP is easy to integrate into the market. In the prepress system of the customer, the original printing equipment of the customer can also continue to be used, and the camera can be retained, which can be used as a supplement to CTcP.
6. CTcP uses the new DSI digital dot imaging technology to obtain high-quality imaging, which can be applied to the highest plate-making requirements.
7. Using an open working platform, the control system is simple and intuitive, easy to use and maintain.
8. The exposure head uses the latest spinning technology to perform continuous exposure to achieve maximum productivity.
9. According to customer requirements, provide a variety of different positioning systems. 10. CTcP is environmentally friendly, and there is no need to pay expensive waste water and waste liquid treatment fees.
6 series, four open, 25pph (dual head), fully automatic publishing, for customers with high publishing efficiency, suitable for commercial packaging books and periodicals, small newspaper publishing.
7 series, folio, 11pph and 20pph, manual semi-automatic and fully automatic, suitable for commercial packaging books and periodicals.
11 series, ultra-large format, 10pph (fourth generation) and 16pph (fifth generation), manual semi-automatic.
Answers to common questions about CTcP