In the fierce market competition, in order to highlight the exquisite product packaging, increase the added value of the product and more effectively carry out package security, more and more product packaging uses hot stamping equipment to have high speed, high accuracy and easy operation. Wide application range and other characteristics. The market's demand for hot stamping equipment has driven the constant innovation of hot stamping equipment manufacturers. In the face of numerous equipment manufacturers and colorful hot stamping equipment, it is particularly important for printing manufacturers to carefully select and complete hot stamping equipment. At present, the hot stamping process can be divided into ordinary hot stamping, hot stamping and embossing are completed at one time, and three main methods of hologram trademark hot stamping. 1. Ordinary hot stamping According to the different anodized aluminum materials, ordinary hot stamping is divided into different ordinary anodized aluminum manufacturing processes, so there are situations where it is difficult for laser anodized aluminum to peel off during hot stamping, reflecting the phenomenon that the anodized aluminum hot stamping is not true and the peeling is not Completely, there are spots that can not be ironed. At this time, the aluminum material supplier should be contacted. According to the texture of the hot stamping substrate (printing material), the supplier provides a more suitable anodized aluminum material. In the ordinary anodized aluminum hot stamping, then According to the new air requirements of different anodized aluminum production plants, the most appropriate temperature, speed and pressure should be selected during hot stamping to achieve the best effect of hot stamping. Commonly used hot stamping processes are round flat hot stamping and flat flat hot stamping, where round flat hot stamping has many unique features due to line contact. 1. Wide range of hot stamping substrates Different hot stamping substrates have different requirements for anodized aluminum and hot stamping equipment. Since anodized aluminum has certain adaptability requirements for hot stamping substrates, before hot stamping on different substrate surfaces, you should first check with the anodized aluminum supplier to apply to different materials and worry about the aluminum model, such as white card The hot stamping on paper, ink layer, UV ink and composite film requires slightly different anodized aluminum. In addition, it is particularly important to choose the right equipment for different hot stamping substrates. For example, when hot stamping on the coated paper, the thermal contact time between the anodized aluminum and the thin wax must not be too long, but the anodized aluminum can be transferred normally, so the same type of anodized aluminum is used. , Only the round flattening hot stamping method can be competent, because the round flattening hot stamping method is line contact, the whole paper pressing time is longer, but the contact time evenly distributed on each line is very short, so as not to damage the film Layer, and the temperature is even, it can show the bright effect of hot stamping anodized aluminum. 2. Suitable for large area hot stamping When hot stamping a large area of ​​anodized aluminum (as-is, through-print lines), the round flattening hot stamping method is also superior to the flat flattening hot stamping method. Because the line contact method with round hardness and flatness is easier to peel off the anodized aluminum and completely eliminate the air, it effectively solves the phenomenon of unrealistic hot stamping and paste printing that often occur in flat pressing hot stamping. In order to achieve the purpose of anti-counterfeiting and increase the added value of goods, most of the products in modern hot stamping are registered hot stamping, and the accuracy requirements are very high. Youheng company's MK series round flat stamping machine is improved on the basis of the original Heidelberg embossing machine. With the help of the excellent performance of the world's excellent printing presses, after thorough renovation, the repeat hot stamping accuracy can meet the requirements of screen four-color printing. Therefore, it provides a strong guarantee for hot stamping, and the accuracy of repeated secondary hot stamping can reach within 0.02mm. However, if such equipment is not completely renovated, it is difficult to achieve such precision requirements. Although the flat pressing hot stamping machine has great difficulty in solving the problem of hot stamping accuracy, the hot stamping speed is fast, and it is suitable for processing large batches of long-type jobs. At present, the domestic flat press hot stamping equipment is limited by the material and heat treatment process, and the accuracy of the second repeat overprint needs to be improved; and the high-precision Bost hot stamping machine is expensive. Therefore, based on the introduction of foreign advanced technology, key materials and components, Youheng has introduced a flat pressing hot stamping machine. Its secondary hot stamping accuracy can reach plus or minus 0.085mm, which basically meets the customer's requirements for overprinting and overcomes In order to solve the problem of low speed of the round pressing hot stamping machine, the maximum hot stamping speed can reach 5000 sheets / hour. The above are the advantages and disadvantages of the flat pressing hot stamping machine and the round pressing hot stamping machine in thick paper hot stamping. When printing on thin paper sleeves, the advantages and disadvantages of printing should be selected. When the thin paper sleeve is hot, you should choose a round hot stamping machine, because the flat pressing equipment is limited by the structure. It is difficult to control the smoothness of the thin paper during operation. When mass production, use the flat pressing equipment for hot stamping Tissue paper will be sketched as a large scrap rate, so that it is offset with high speed, and it is not worth the loss. Second, hot stamping, pressing and bumping are completed at one time In fact, as early as the early 1980s, many manufacturers in China conducted an attempt to complete hot stamping and embossing, but the process only stayed at the level of inaccurate micro-embossing in the blank space. In recent years, more and more manufacturers have required to complete the hot stamping on the product at one time, and they are required to stamp out the obvious concave and convex graphics. The key of this process lies in plate making. After corrosion, the graphic part of the ordinary hot stamping plate is a right-angled line, and the hot stamping and embossing once forming hot stamping plate requires the graphic part to be rounded. Therefore, it is used for hot stamping and embossing once The formed hot stamping plate needs to be treated twice after corrosion, and the number of domestic artists who are proficient in this process has been reduced year by year, making this process limited. As a last resort, many manufacturers had to go abroad to make plates. Kurz, a well-known foreign plate-making company, uses advanced electro-engraving methods to produce hot stamping. The hot stamping plate with one-time embossing and convex forming has high precision. Although it is expensive, the hot stamping effect is very beautiful. In this process, you must choose a hot stamping machine with high accuracy when selecting equipment. Because this process requires two concave and convex templates, once the machine is not accurate enough, it will cause damage to the punch. Although the accuracy of the round flat stamping equipment is high, it is difficult to operate. Special attention should be paid to the thickness of the roller lining and the height of the lower plate table to ensure that the line speed of the equipment is the same, otherwise it will cause the plate rush phenomenon due to the inconsistent line speed. Most flat stamping and hot stamping machines will change the position after the second edition due to accuracy problems, and it is also easy to cause damage to the punch. The new MK series A type round flat stamping machine introduced by Youheng Company adopts a patented design of lifting plate device, which effectively solves the above problems, and is currently being promoted. If you use a constant flat stamping machine, the operation will be more convenient than the round flat stamping machine. But no matter what kind of equipment is used in this process, it needs careful adjustment. 3. Holographic hot stamping Laser full hot stamping technology is a new type of laser anti-counterfeiting technology. It has only been a few years since its introduction, but it has been widely used abroad, mainly for various tickets, credit cards, passports, banknotes, trademarks, packaging Anti-counterfeiting. According to the characteristics of hologram hot stamping logo, holographic hot stamping is divided into continuous pattern hot stamping and independent trademark hot stamping. Because the holographic signs are regularly arranged on the anodized aluminum, each time the stamping is a few words or patterns as a whole stamping to the final product, the stamping accuracy is not too high, such stamping on the equipment The requirements are not high, and all the hot stamping equipment can be completed. The choice of equipment is too different from that of ordinary anodized aluminum hot stamping. The only difference is that the manufacturing process of such anodized aluminum is not easy to master, and the equipment investment is relatively high. Frontier holographic logo hot stamping is a replacement product of ordinary laser holographic hot stamping (note: ordinary laser holographic technology is currently mostly used for self-adhesive labels). In order to make the holographic logo hot stamping produce good anti-counterfeiting effect, most of them use independent pattern holographic logo hot stamping, that is, make the holographic logo on the anodized aluminum into an independent trademark pattern, and each pattern has a pair Bit mark, which puts higher requirements on the function and accuracy of the hot stamping equipment, not only requires the equipment to have a positioning recognition system, but also requires that the positioning hot stamping accuracy can reach more than 0.5mm. Outdoor furniture refers to furniture used for outdoor environment, mainly used for outdoor leisure, entertainment and dining activities. The classification of outdoor furniture can be divided according to the material, function and shape. Outdoor Table,Rattan Table,Rattan Chair,Beach Furniture Foshan Shengshi Zhihui Technology Co., Ltd. , https://www.sshotelfurniture.com
First, classification by material
1. Wooden outdoor furniture: Wooden outdoor furniture is usually made of natural wood, such as teak. Wooden furniture has a natural, rustic character and is suitable for outdoor Spaces such as gardens, terraces and courtyards.
2. Metal outdoor furniture: Metal outdoor furniture is usually made of iron, aluminum, stainless steel and other metal materials. Metal furniture has the characteristics of durability and stability, suitable for long-term use in outdoor environment.
3. Cloth outdoor furniture: Cloth outdoor furniture is usually made of waterproof, sun protection and other special treatment of fabric. Fabric furniture with soft, comfortable characteristics, suitable for use in outdoor leisure areas.
Second, Classification by function
1. Leisure Chair: Leisure chair is the most common kind of outdoor furniture, usually used for outdoor leisure, sunbathing and other activities. There are a variety of leisure chairs, folding chairs, recliners, rocking chairs and so on.
2. Dining Table And Chair: Dining table and chair are mainly used for outdoor dining, usually consisting of a table and several chairs. Dining tables and chairs of various styles, there are round tables, square tables, etc., suitable for different venues and the number of people dining needs.
3. Parasol: Parasol is used for outdoor shading, which can effectively block direct sunlight and provide a cool resting environment. There are various styles of sunshade umbrellas, including ordinary umbrellas, large umbrellas, and rotating umbrellas.
Third, Classification by shape
1. Chairs: including ordinary chairs, rocking chairs, recliners, etc., suitable for outdoor leisure and sun.
2. Table category: including dining table, coffee table, side table, etc., suitable for outdoor dining and placing items.
3. Sofa category: including single sofa, double sofa, combination sofa, etc., suitable for outdoor leisure and parties.
4. Reclining chairs: including hammocks, reclining chairs, etc., suitable for outdoor naps and rest.
5. Queue class: including benches, benches, etc., suitable for outdoor queuing and waiting.
In summary, the classification of outdoor furniture can be divided according to material, function and shape. Different outdoor furniture is suitable for different outdoor environment and activity needs, choose suitable outdoor furniture can provide comfortable and convenient outdoor life experience.
From the development of hot stamping technology to see the continuous innovation of hot stamping equipment