Say goodbye to the same colorful paint to add home fun

HC Coatings News: Tired of the same white wall, I always want to make some changes in the home, even if it is only a partial wall, it can add a lot of distinctive atmosphere. However, there will always be some worry and uneasiness in my heart. I don't know what kind of wallpaper or paint to choose, and I don't know how to achieve it. How to mix and match?

1. Natural materials on the wall of the foyer - can be used and painted many times

Half of the wall: The entire base of the wall is cement, divided into upper and lower parts. Firstly, a layer of interface agent or environmentally friendly nitro varnish is applied to the base wall to seal the base layer, then flattened with putty, dried and polished, and then an environmentally friendly cloth is applied to the wall surface.

The lower part of the wall: the pattern of the wall and the upper part of the lower part is different. It adopts the silhouette treatment method and quotes the elements of the Roman column, but still retains the upper half of the diagonal grille. The upper and lower echoes are formed, and the same color is used throughout the wall to unify the atmosphere of the home.

Curtains (curtain decoration effect picture): After the trajectory thin rods are drilled, they are lightly hidden in the atmosphere formed by the wall surface, and the curtains are hung with simple buttons as decoration.

The seat in front of the window: the recessed part next to the dressing cabinet, made a short seat with 8 cm thick shelf, just for the family to change the shoes when entering and leaving, you can also temporarily put some items.

Mirrors and candle lights: The entrance hall is always a place where people must go out before going out, so the preparation for dressing here is necessary.

In order to ensure the close contact between the mirror surface and the candle light and the wall surface, you can use the hanging nails that are integrated with the mirror surface and the candle light. After all the processing on the wall surface is completed, drill several holes of appropriate size and distance directly on the wall. Just insert the hanging nails of the mirror directly.

Floor: The floor is made of laminate flooring. Just select the color and pattern and let the manufacturer install it directly. However, it should be noted that under normal circumstances, the laminate flooring should be pressed every seven meters to avoid the phenomenon of empty drums in the future expansion.

2, the three-dimensional material of the living room wall - wall base cloth and paint used together

Window: The whole window is divided into two parts: the fixed glass window below and the rotating glass window on the top. The angle of the upper rotating window is controlled by the handle on the side of the lower window and is oriented to the inside or the outside.

Roof: The roof is the same color as the half of the wall, making the entire space seamless, and the continuous and extended visual effect increases the height of the space. The joint treatment between the wall base fabric and the wall surface mainly uses putty.

Platform: More than ten centimeters above the ground and half-height walls directly divide the two functional areas, even if the paint on the wall and roof uses the same color. The platform can be realized by playing keel along the ground, paving the wooden floor, or directly using cement mortar.

Half of the wall: The upper part of the wall wall base fabric has a simple texture and still has a three-dimensional effect. The goose-yellow paint is consistent with the ground color. The base layer putty on the wall surface of the blank house that has just been handed over will not be powdered. If it is flat, dry, free of empty drums, and the yin and yang angles are straight, the base fabric can be directly pasted after polishing.

The lower part of the wall: the lower part of the wall base fabric adopts a symmetrical silhouette vein pattern. Whether using cloth adhesive or wall adhesive, be aware that the first frame must be vertical or horizontal. Because the surface texture of the wall fabric is strong and uneven, it is not smooth, and there is a convex in the concave, and the concave is concave, which can effectively block the reflection of sound waves and has a certain sound absorbing function.

Stairs (stairs decoration renderings): When you step up, you can enter the bedroom (bedroom renovation renderings) space, so the stairs do not need to install handrails. Whether the stair treads are wood or reinforced concrete, they are painted with paint to match the color of the entire space.

3, the restaurant's horizontal stripes expansion - water-based paints and color

Corner line: The decorative bead on the top of the wall is at the junction between the roof and the facade wall. After the putty is polished, the seam tape is pasted, the joint tape is covered with putty, and dried with sandpaper.

Wall surface: After processing the base layer of the wall with putty, etc., it can be painted on it. The horizontal milky yellow and brown wide stripes are evenly spaced, measuring approximately 20 cm in size and traversing between the two windows.

Hanging paintings and wall lamps: The hanging paintings are still placed in the foreground relative to the wall surface, so the brown color that is deeper than the wall is used as the border color, and there is a painting that is not light and not thick. The wall lamp is actually a candlestick, and the climbing effect formed by the natural growth of flowers and branches is echoed by the curtain fabric and the chair fabric.

Chandelier: The chandelier's wiring is concealed and hidden in the roof, so it must be considered before construction. When installing the chandelier, wait until the wall coating is completely dry. The shades and poles of the wrought-iron chandeliers are all brown, which echoes the color of the walls.

Table and chair meals: tables and chairs and other furniture at this moment become a foil and embellishment, the color is dark brown that is harmonious with the wall coffee, and the shape of the chair back echoes the shape of the chandelier.

4, the diagonal stripes of the bedroom - simple techniques

Roof: The white roof and side walls are divided by decorative strips. After the four walls are decorated with thick lines, the roof should avoid unnecessary decoration and color, otherwise it will easily cause people to feel depressed and chaotic.

Fresh air system: The fresh air system keeps the sealed room and the outside world in air circulation. It is best to measure the design before the decoration. If the renovation is over, the corresponding fresh air system can also be installed, but only for apartments.

Doors and door frames: The door and door frame are all white, and the door is made of a honeycomb structure with a soundproof structure, which is very suitable for use in the bedroom. If the decoration company is to make a door at the decoration site, it is recommended to choose a water-based wood primer and color paint to avoid harmful gases that endanger health.

Table lamp: The lighting on the bedside is a necessary part of the living environment. Only the bedroom with spotlights will inevitably make the reading before going to bed inconvenient. After the renovation, the desk lamp can be selected according to the style of the whole space. This base is a neo-classical fabric table lamp in metal that is hidden in the pattern on the wall.

Spotlights: Seven spotlights are distributed around the roof on the roof. Three times the pressure switch can control the brightness of the seven lamps in different parts. The installation of such semi-automatically controlled switches and spotlights requires early advancement of the roof of the entire bedroom to achieve a variety of changes.

Editor in charge: Wang Maomao