[ Chinese wardrobe network ] With the improvement of the social level, the requirements of consumers in the custom industry are getting higher and higher. The maintenance and maintenance of Chengdu custom wardrobes in our lives also need attention. Proper use and maintenance have a direct impact on extending the life of custom wardrobes. Maintenance mainly starts from the cleaning of the wardrobe surface, prevention of scratching, inspection of joints, etc., as follows: (1) When there is dust on the surface of the wardrobe, dust should be removed with a donkey or a soft cloth. If there is stain on the surface, it should be removed by sanding. Conditional regular maintenance of the face with oil wax. Wipe the hardware with a dry soft cloth. Do not use chemical cleaner or acidic liquid. If it is found to have black spots on the surface, it can be wiped with a little kerosene. (2) Try to avoid damage or scratch the surface of the wardrobe. If the surface is slightly scratched and bruised, use a mixture of cloth soot and lemon juice or sand oil to dry it. After drying, it can be waxed; if the scratch is deep If the bruise is more serious, you need to reconcile the same color paint. (3) Regularly check the connecting parts and find that the looseness is tightened in time and a small amount of lubricating oil is injected. If the malfunction occurs due to disassembly and assembly, the store should be notified in time to assist in handling. (4), the door should be kept clean, and there should be no debris or dust in the track to prevent heavy objects and sharp objects from hitting the track. When cleaning, use a semi-wet rag to wipe the cabinet and cabinet door. Never use corrosive detergent. The dust of the track can be cleaned with a vacuum cleaner or a small brush, and the metal parts such as the frame and the tie rod are wiped with a dry cloth. (5) Place the balance and avoid placing it in a place with high temperature, severe vibration, humidity or direct sunlight, and keep the room ventilated. Avoid contact with corroded liquids such as alcohol, banana water, gasoline, water, nail polish, strong acid, strong alkali, etc. (6) Keep the environment ventilated and dry to keep the cabinet cool and dry. (7), to prevent external force / heavy impact, touch the slide rails and the door panel, the push and pull action is gentle, to prevent violent violent impact. (8), please do not disassemble and modify it. If you need service, please contact the professional. The above maintenance of the custom closet is very effective, you can take care of your own custom wardrobe in accordance with the corresponding methods, extend the use of the wardrobe. Aluminum In Sink Dish Rack,Expandable Dish Drainer Rack,In Sink Dish Drainer,Aluminum Expandable Dish Rack Jiangmen Xinhui Siqian Xiangyi Metalwork Factory , https://www.xydryingrack.com
Chengdu custom wardrobe in the maintenance of the precautions