These few solid wood furniture purchase mistakes are very confusing

With the emphasis on health and environmental protection, solid wood furniture has become the preferred choice for many families to purchase furniture because of its natural environmental protection and other characteristics. Although there are many consumers who buy solid wood furniture, people don't know much about solid wood furniture. When buying solid wood furniture, it often falls into the following misunderstandings:

Mistakes in the purchase of solid wood furniture: finger joint plate can not be used, stability is not good, there is glue.

The so-called finger joint board is solid wood board. Finger joint materials, laminated materials, etc. are mostly solid wood materials formed by secondary processing of wood such as twigs and wood.

Contrary to the introduction of the business, compared with the solid wood sawn timber of the same material, its stability is relatively better, but the aesthetics is relatively poor. Properly handled, its environmental performance is no different from solid wood sawn timber.

Mistakes in the purchase of solid wood furniture: In the past, furniture that was used for woodworking rarely had problems such as cracking, so it was still good by hand.

The solid wood furniture that was made many years ago is stable because the wood is naturally placed for a long time. Dry weather is the best way to dry. This way the wood is used very well after it is very stable.

But now it is industrial production. Basically, the materials have to be started, so once the moisture content is not well controlled, problems will arise. This is not caused by manual or mechanical processing.

Mistakes in the purchase of solid wood furniture: There are businesses to sell large core boards as solid wood panels.

The large core board and the blockboard are the plywood of the solid wood core. It is made up of two veneers in the middle of the veneer. Because there are solid wood strips inside and outside, it is very confusing.

Its main uses are furniture and wood doors and door covers, heating covers, curtain boxes, etc. However, the furniture made with it can only be called wood-based panel furniture.

There are a lot of man-made boards on the market. Try to be close to the solid wood in order to confuse consumers. This must be vigilant.

Solid wood particle board is the particle board. Ozon board, scientific name is oriented strand board. Particleboard is made by cutting wood into shavings and then pressing it. The Australian pine board is actually a MDF. The MDF is an artificial board made of wood fiber and an appropriate amount of adhesive. The so-called multi-layer solid wood is plywood. It was made by superimposing multiple layers of veneers, so someone gave it the name.

Mistakes in the purchase of solid wood furniture four: solid wood furniture cracking deformation, the business argued that this is the characteristics of furniture, no way to change.

Wood is indeed prone to the problem of swelling and shrinking, but if the production process is in place, the wood is dry and well, leaving the seam in place, and the solid wood furniture is not easy to crack and deform.

In the production process of solid wood furniture, the most important thing is the wood drying process. If the drying is not done well, the furniture made will be easy to crack and deform. If it is dry, the stress of the wood itself will be eliminated, and there will be no deformation. Cracking problem.

Mistakes in the purchase of solid wood furniture: The merchant said that because the wood is to choose the best part, so only the wood core is left, here is the most dense and hardest part of the wood.

First of all, only the mahogany is strictly divided into the core material and the sapwood, because the color difference between the two is relatively large. This is clearly stated in the standard.

Mistakes in the purchase of solid wood furniture: solid wood furniture equals all solid wood furniture

Generally speaking, solid wood furniture is divided into three categories: all solid wood furniture, solid wood furniture, solid wood veneer furniture.

All solid wood furniture means that all wood parts of the furniture are made of solid wood sawn timber or solid wood panels. It does not use any form of wood-based panels or other veneer grain paper veneers. Because all solid wood furniture has high requirements on the production process, the price of all solid wood furniture is relatively expensive.

Solid wood furniture means that the furniture substrate is made of solid wood sawn timber or solid wood board, and the surface is not covered.

Solid wood veneer furniture means that the furniture substrate is made of solid wood sawn timber or solid wood board, and the furniture surface is affixed with solid wood veneer or thin veneer. Solid wood veneer furniture requires that the substrate part must be solid wood, and the surface is veneer. Compared with solid wood furniture and solid wood furniture, the cost of solid wood veneer furniture is lower and the cost performance is higher.

Mistakes in the purchase of solid wood furniture: solid wood furniture is absolutely environmentally friendly

Many consumers mistakenly believe that solid wood furniture is absolutely environmentally friendly. This is a long-standing consumer misunderstanding. In fact, solid wood furniture is not necessarily perfect. It also has some shortcomings. Some people don't understand it. They think that when they buy solid wood furniture, they can sit back and relax, and they will stay away from harmful substances such as formaldehyde. In fact, this depends on the processing technology of the furniture and the use of accessories. Although some furniture is made of solid wood, his paint, glue, various additives and other substances are harmful, resulting in such solid wood furniture is not environmentally friendly. .

Such furniture is not only not environmentally friendly, but will have adverse effects on the human body, so it must be noted. For solid wood furniture and other materials, the furniture is the same. Some processing techniques are immature and there will be harmful substances. Solid wood furniture generally uses semi-composite materials, and more glue is used in the processing. Compared with solid wood furniture, solid wood furniture is less environmentally friendly.

Mistakes in the purchase of solid wood furniture: solid wood furniture must be more environmentally friendly than panel furniture

When many people buy furniture, they face solid wood furniture and panel furniture. They often don't know how to choose. They often mistakenly think that solid wood must be more environmentally friendly than panel.

Panel furniture has long left an impression of not being environmentally friendly. It contains many gums, the edges are easy to fall off, and the sheets are not refined enough. However, this kind of cognition is not objective enough. Some plate-type homes with inferior workmanship do have such hidden dangers, but there are many high-quality panel furniture that are guaranteed, and the formaldehyde content is up to standard, and will not affect people's health. Now the plate furniture produced by regular manufacturers can basically meet the national environmental protection standards. Some good brands are willing to work hard on materials, and their safety is not worse than solid wood furniture.

Moreover, the panel furniture has a plurality of veneers, and the color of the styling is more varied and varied, and is generally favored by young consumers. The design is more flexible than solid wood furniture, and the plates are now more environmentally friendly and cost-effective. Therefore, it is not possible to judge the environmental protection of furniture by simply using solid wood and plate, but to distinguish the quality of furniture from the advantages and disadvantages of the products provided by the brand. Therefore, we should not think that as long as it is a piece of furniture, it means that it is not environmentally friendly. Today, most of the well-known brands of panel furniture are in line with national environmental standards, and the cost performance is high. Consumers do not have to blindly focus on solid wood furniture.

Mistakes in the purchase of solid wood furniture: picking more beautiful colors

Aesthetics is another important indicator when people choose furniture. A beautiful piece of furniture, in addition to craftsmanship, styling, color tone also plays a key role. However, the surface of the furniture is too shiny, heavy and bright, but it is very unhealthy.

First, the paint will contain a lot of formaldehyde, and secondly it will contain a lot of heavy metals. This is very unfavorable to the health of the human body. Even in the current market, the new favorite water-based paint, although the content of heavy metals such as lead, mercury and chromium is much lower than that of oil-based paint, it also contains a certain amount of heavy metals. Therefore, when purchasing solid wood furniture, do not choose the color is too bright, do not choose the surface sparkling, the paint is thicker, it is best to choose natural, light color.

Mistakes in the purchase of solid wood furniture: thick is not necessarily mahogany furniture

Because of its elegant appearance, collectible value and expensive value, mahogany furniture has given little unscrupulous merchants an opportunity to learn from it. In order to create a so-called sense of weight, unscrupulous merchants will make a big fuss in the middle of mahogany furniture, with lead, steel pipes, and cement.

In addition to the "sandwich" phenomenon, the "white skin" phenomenon in mahogany furniture is also very serious. In order to avoid buying mahogany furniture that is considered to be weight-increased or mahogany furniture that has been finished with makeup, when you sign a contract for the purchase of mahogany furniture with a merchant, you must mark it as "all mahogany furniture" or the main component of mahogany furniture. The manufacturer shall provide the material inspection certificate or report.

Mistakes in the purchase of solid wood furniture 11: online shopping furniture discounts

With the development of network e-commerce, there are more and more people buying furniture online, but there are more and more complaints about the quality of furniture. The problem of formaldehyde, the smell is big, the material is shoddy, and so on. The source, the production plant, the meticulous workmanship, and the safety of environmental protection quality may directly affect its environmental protection. Consumers should not buy wood furniture online for the convenience of the map, the price is cheaper than the physical store.

Here, Xiao Bian advises consumers that when shopping online for solid wood furniture, it is best to buy it on a well-known brand shopping website. Pay attention to whether the business has clearly indicated the quality inspection certificate of the product, as well as the after-sales return and replacement problem. It can make you buy a solid wood furniture with a certain degree of environmental protection.

Pay attention to the following details when purchasing solid wood furniture

Verify solid wood

Determine whether the furniture is really made of solid wood, or indicate where the solid wood is, where is the wood-based panel. Peek into the mystery of wood: wood grain and knots. This is the method disclosed by the industry to identify whether it is a piece of solid wood. For example, if a cabinet door looks like a pattern, then the corresponding pattern of the pattern changes, and the corresponding pattern is seen on the back of the cabinet door. If the correspondence is good, it is a pure solid wood cabinet door.

Judging tree species

What kind of wood is made of wood, which directly affects price and quality. Ordinary solid wood furniture usually uses eucalyptus, white oak, ash, eucalyptus, eucalyptus, rubber wood, eucalyptus, while the precious mahogany furniture mainly uses "rosewood, wenge, rosewood". The market for solid wood furniture is rather chaotic, and there are often things that are shoddy and confusing. It is best to buy brand-name products. At the same time, note that the price of wood can only be higher and higher, and it is too cheap to be fraudulent.

Observing wood

Open the furniture cabinet door and drawer to observe whether the wood is dry and white, and the texture is tight and delicate. If furniture made of particleboard, MDF, and one-time molded board is used, it is required to open the door or drawer without irritating odor.

Looking for defects

The main stress-bearing parts of the furniture, such as the column and the load-bearing horizontal strip connecting the column to the ground, should not have large knots or cracks or cracks. The structure is firm, the frame must not be loose, and it is not allowed to break or break the material. Don't buy a "three-in-one" that uses a saw to cut a particle board, nail it with a nail, and paint it with a paint. Don't buy a furniture made of "three no" drawers that help you with no bad, no flaws, no straps at the end. . The components of the wood-based panels used in the furniture shall be edge-sealed, and the various accessories shall be installed with few pieces, missing nails and nails.

Test strength

The strength of the board surface can be pressed with a finger to feel the fastness of the board surface. One side of the material should be fixed by a well-shaped solid frame. If the skeleton is sparse, the surface will feel empty and false, and the panel will vibrate greatly. The bottom of the drawer should be pressed by hand to test the strength. Generally, the bottom of the partition is multi-layered and the area is large. The partitions should be made of five-layer boards. Doors and drawers switch to be flexible. When veneer panel cladding and other materials, should be similar to the color of packaged product, the product surface coating does not allow wrinkled skin, sticky lacquer and drain.

Check interface

The edge, top, front and back of the furniture are hinged, tongue-and-groove, or double-dipped. It is advisable to use a dovetail or butterfly joint. Heavier furniture should be screwed with a protective block in the corner and glued. As for the back plate part, it is also necessary to check whether it is set and the screws are attached.

Test slide

Check the slides and latches of the drawer. The drawer should be solid and secure with the screws tightened inside. It is a good idea to open the drawers, the event table, the doors and other parts to ensure that they can be used freely and properly connected.

Surface inspection

Place your hand on the surface of the furniture and carefully check that the polished surface is smooth, especially to avoid roughening of the legs. Are there any streaks in the pigment? Are the pigments in the corners too thick? Are there cracks or bubbles?

Bottom detection

Turn the chair upside down on the furniture and look at how they are made. As for the table, check from the bottom. See if the seams are reinforced with screws and wedges? Is the strip and the hook fastened? The seam has no excess glue or filler.

Judging origin

Pay special attention to the moisture content and origin of solid wood furniture wood. The climate of various regions in China has an impact on the moisture content of wood. The moisture content of wood should not be higher than 1% of the local equilibrium moisture content of the area of ​​use. Otherwise, the wood will be separated due to expansion and contraction, and the furniture will fall apart. . Therefore, to buy mahogany furniture produced by drying equipment and dry-processed enterprises, mahogany furniture produced locally or in the field is not important. The key is whether the moisture content is consistent with the equilibrium moisture content of the area of ​​use. There is an old saying "solid wood but the Yangtze River", that is to say, after the solid wood furniture produced in the south reaches the north, the moisture content will be affected by the climate, which is prone to cracking and deformation. Therefore, when you purchase, you should see the place of production.

Titanium Drinkware

Titanium outdoor drinkware contains a variety of product types, whether you need the coke bottle shape bottle, portable wine flask or daily use mugs, you can find the corresponding products here. Our titanium drinking utensil is more healthy and non-toxic than conventional plastic drinking utensil. Compared with glass drinking utensil, it is more portable and unbreakable. You can use it for daily or take it with you when exercising outdoors, no matter which use scenario, our products can meet all your needs. Also, we can customize the exclusive LOGO on the drinking set for you, making your mug and bottle more fashionable and unique.