Application 1: Electric bicycle charger test The object to be tested needs to test the low temperature alarm and the high temperature alarm. The NTC (temperature simulator) is installed in the 99093 fixture to simulate the change of different resistance values ​​at high and low temperatures to achieve the test purpose. Test items: no-load test, output voltage/current test, battery full test, normal charge test, low temperature alarm test, high temperature alarm test, average efficiency test, leakage current test, TTL signal control, relay test, Barcode bar code printing. Application 2: LED driver test The same is the LED driver test, the marine instrument can be combined with the actual needs of the customer, the combination of software and hardware changes, using non-standard system integration, in order to achieve cost savings for customers and reasonable completion of the customer's actual needs of the test project. Test items: DC output voltage, DC output current, efficiency, test adjustment, input RMS current, input peak current, input power, input power factor, load stability, voltage stability, combined stability, short circuit test, over current Protection, over power protection, TTL signal control, relay testing, Barcode barcode. Application 3: Electric motorcycle charger test The OI6010 power supply automatic test system is equipped with standard test items. Users only need to determine the test specifications and conditions, and they can test with standard items. Test items: DC output voltage, DC output current, efficiency, test adjustment, input RMS current, input peak current, input power, input power factor, load stability, voltage stability, overall stability, short circuit test, over current Protection, over power protection. Application 4: PowerBank mobile power test For PowerBank mobile power test, OI99094 precision voltmeter and voltage regulator can provide D+, D- up to 4 groups of applications, and then with optimized software customized test items, which can greatly reduce test time and save costs. Test items: open short circuit test, charging parameters, quiescent current, discharge parameters, over discharge current test, output short circuit test. Application 5: Full-featured testing of LED drivers OI6010 can provide full-function test of LED driver (including electrical characteristics IEC-61000-4-11) and through the adjustment of OI99092 (integrated test fixture) wiring, the specification of the object to be tested can be upgraded from 0~300W to 0~600W. Test items: surge current, standby power, input current, input power, input power factor, DC output voltage, DC output current, efficiency, in-test adjustment, overshoot voltage, load stability, voltage stability, overall stability , short circuit test, over current protection, over voltage protection, PARD ripple test, setup timing, hold timing, rise time, fall time, TTL signal control, relay control. Application 6: DC/DC converter test Optimized DC/DC transmitter-specific test items, plus customized projects that meet customer needs, dramatically increase test speed. Test items: standby power consumption, input current, input power, DC output voltage, DC output current, efficiency, in-test adjustment, load stability, voltage stability, comprehensive stability, short-circuit test, overcurrent protection, PARD trace measurement , TTL signal control, relay control. Women'S Handbag,Summer Bags,Women'S Tote Bags ,Blue Handbag GUANGZHOU KOEDS LEATHER LIMITED , https://www.kodes-bag.com
OI6010 power automatic test system application example