Material
Aluminium/ Stainless steel/ Acrylic Panel
Size
Customized
Lighting Colour
White/ Pink/ Red/ Green/ Blue/ Yellow etc.
Lighting Source
Led Strips/LED module
Features
Waterproof/ Low Consumption / Bold Visual Effect etc.
Safe Voltage
Normally 12 DC, 110V~230V
Processing
Cutting, Sanding, Bending, Glue, Wiring, etc.
Application
Both indoor/ outdoor Decoration and advertisement.
Average Life Time
>60,000 hours
Working temperature
-20℃~60℃
Installtion Method
3M adhesive, Back screw bolts fixing or hanging, with 1:1 fixing template and accessories for Installation Reference
Packaging
Covered with bubble wrap and foam inside,and packed with wooden case outside. Also can be packed as your requirements.
Shipment
By express:(TNT/UPS/DHL etc.):4-5 Days
By Air:5-7 Days
By Ship:25-35 Days
OEM/ODM
Accepted
Low Viscosity: If the viscosity of the adhesive is too low, moisture in the adhesive penetrates quickly into the corrugated medium, causing the starch granules to fail to be fully gelatinized and the bond not being strong. At the same time, the corrugated paper coming out of the corrugating machine will be very dry and brittle.
High Viscosity: If the viscosity of the adhesive is too high, the adhesive will hardly penetrate inside the paper, and the corrugated paper coming out of the corrugating machine will be very soft, causing subsequent processing and printing difficulties. At the same time, the consumption of starch will also increase. Adhesive fluidity will decrease. The application of high viscosity adhesives at high speed single-faced machines can be difficult.
Gelatinization temperature The gelatinization temperature is the temperature at which the adhesive begins to thicken and produce adhesive forces. The initial gelatinization temperature of corn raw starch is about 72 degrees. The gelatinization temperature of the adhesive has a great influence on the adhesive strength, especially on the double-sided machine, which also has a great influence on the vehicle speed. The gelatinization temperature can be adjusted by adding caustic soda according to different corrugating machines and base papers. If the gelatinization temperature is too high, it will cause the cardboard to open. The speed of the corrugator must be reduced to obtain sufficient energy, especially to produce multilayer cardboard. If the gelatinization temperature is too low, the adhesive is already gelatinized before it penetrates, the cardboard becomes brittle, and the bonding is not strong. It may be pasted on the receiving slot. When the adhesive is stored for a period of time, the gelatinization temperature will increase.
The concentration of the concentration directly affects the viscosity of the adhesive. Excess concentrations will result in excessive starch consumption, poor fluidity, uneven sizing, and poor adhesion. If the concentration is too low, the adhesive effect will not be achieved, the cardboard will be opened, the cardboard will be too wet, etc.
If the above three indicators are not well controlled, it will lead to: 1. The cardboard is too wet and soft to be printed and subsequently processed. 2. Corrugated cardboard surface, into a "washboard." 3. Cardboard warping. 4. Cardboard delamination. 5. The speed is reduced. 6. Excessive consumption of starch.
Specifications: Gelatinization temperature: single-sided machine 58-62 degrees double-sided machine 52-60 degrees starch consumption: single-sided machine 3-5 g / square meter double-sided machine 5-7 g / square meter Viscosity: According to different Corrugating machine and base paper may be. Concentration: According to different corrugating machines and base paper, and the double-sided machine concentration should be higher than single-sided machine.
Square Single Sided Light Box
Specifications:
Models pictures:
FAQ
Q: Are you a trading company or factory?
A: We are factory.
Q: What is the MOQ?
A: No MOQ required normally, that means you can always ask for a sample first. But remember the sample freight is at your own cost.
Q: Do I have to have a design to inquire?
A: Yes! A well made design/artwork is the most helpful thing to get an exact quote. However, if you really do not have a design...just let us know your idea, we'll cover it.
Indoor Light Boxes,Single Sided Light Box,Wall Mounted Light Boxes,Square Single Sided Light Box
Chengdu GodShape Sign Co., Ltd , https://www.signsgs.com