canine parvovirus Drug Names Generic Name: CPV ELISA Kit. Purpose This kit allows for the determination of CPV concentrations in canine serum, and other biological fluids. Principle of the assay The kit assay CPV level in the sample, use Purified CPV antibody to coat microtiter plate wells, make solid-phase antibody, then add CPV to wells, Combined With CPV, after washing and removing non-combinative antibody and other components, then Combined CPV antibody which with HRP labeled become antibody-antigen-enzyme-antibody complex, after washing Completely, Add TMB substrate solution ,, TMB substrate becomes blue color At HRP enzyme-catalyzed, reaction is terminated by the addition of a sulphuric acid solution and the color change is measured spectrophotometrically at a wavelength of 450 nm. Compared with the CUTOFF value, according to this to judge CPV exist in the sample or not. Materials provided with the kit Materials provided with the kit 48determinations 96 determinations Storage User manual 1 1 Closure plate membrane 2 2 Sealed bags 1 1 Microelisa stripplate 1 1 2-8 ℃ Negative control 0.5ml × 1 bottle 0.5ml × 1 bottle 2-8 ℃ Positive control 0.5ml × 1 bottle 0.5ml × 1 bottle 2-8 ℃ HRP-Conjugate reagent 3ml × 1 bottle 6ml × 1 bottle 2-8 ℃ Sample diluent 3ml × 1 bottle 6ml × 1 bottle 2-8 ℃ Chromogen Solution A 3ml × 1 bottle 6ml × 1 bottle 2-8 ℃ Chromogen Solution B 3ml × 1 bottle 6ml × 1 bottle 2-8 ℃ Stop Solution 3ml × 1 bottle 6ml × 1 bottle 2-8 ℃ wash solution (20ml × 20 fold) × 1bottle (20ml × 30 fold) × 1bottle 2-8 ℃ Specimen requirements 1. serum- coagulation at room temperature 10-20 mins, centrifugation 20-min at the speed of 2000-3000 rpm remove supernatant, If precipitation appeared, Centrifugal again. 2. plasma-use suited EDTA or citrate plasma as an anticoagulant, mix 10-20 mins, centrifugation 20-min at the speed of 2000-3000 rpm remove supernatant, If precipitation appeared, Centrifugal again. 3. Urine-collect sue a sterile container, centrifugation 20-min at the speed of 2000-3000 rpm remove supernatant, If precipitation appeared, Centrifugal again. The Operation of Hydrothorax and cerebrospinal fluid Reference to it. 4. cell culture supernatant-detect secretory components, collect sue a sterile container, centrifugation 20-min at the speed of 2000-3000 rpm remove supernatant, detect the composition of cells, Dilut cell suspension with PBS (PH7.2-7.4), Cell concentration reached 1 million / ml, repeated freeze-thaw cycles, damage cells and release of intracellular components, centrifugation 20-min at the speed of 2000-3000 rpm remove supernatant, If precipitation appeared, Centrifugal again. 5. Tissue samples- After cutting samples, check the weight, add PBS (PH7.2-7.4), Rapidly frozen with liquid nitrogen, maintain samples at 2-8 ℃ after melting, add PBS (PH7.4), Homogenized by hand or Grinders, centrifugation 20-min at the speed of 2000-3000 rpm remove supernatant. 6. extract as soon as possible after Specimen collection, and according to the relevant literature, and should be experiment as soon as possible after the extraction. If it can't, specimen can be kept in -20 ℃ to preserve, Avoid repeated freeze -thaw cycles. 7. Can't detect the sample which contain NaN3, because NaN3 inhibits HRP active. Assay procedure 1.Number: to sample correspond microtitration well and Number Sequence, each plate should be set feminine comparison 2 wells, masculine comparison 2 wells, blank comparison 1 well (don't add sample and HRP-Conjugate reagent to blank comparison well, other each step the operation are same). 2.add sample: separately add Positive control and Negative control 50μl to the Positive and Negative well. Add Sample dilution 40μl to testing sample well, then add testing sample 10μl. Add sample to the bottom of ELISA plates coated well, don't touch the well wall as far as possible, and Gently mix. 3.Incubate: After closing plate with Closure plate membrane, incubate for 30 min at 37 ℃. 4.Configurate liquid: 30-fold (or 20-fold) wash solution diluted 30-fold (or 20-fold) with distilled water until 600ml, and reserve. 5.washing: Uncover Closure plate membrane, discard Liquid, dry by swing, add washing buffer to every well, still for 30s then drain, repeat 5 times, dry by pat. 6.add enzyme: Add HRP-Conjugate reagent 50μlto each well, except the blank well. 7.incubate: Operation with 3. 8.washing: Operation with 5. 9.color: Add Chromogen Solution A 50ul and Chromogen Solution B to each well, evade the light preservation for 15 min at 37 ℃ 10.Stop the reaction: Add Stop Solution50μl to each well, Stop the reaction (the blue color change to yellow color). 11. assay: take blank well as zero, Read absorbance at 450nm after Adding Stop Solution and within 15min. Determine the result Test validity: the average of Positive control well≥1.00; the average of Negative control well ≤0.10. Calculate Critical (CUT OFF): Critical = the average of Negative control well + 0.15. Negative control: sample OD <Calculate Critical (CUT OFF) is CPV Negative control. Positive control: ample OD≥ Calculate Critical (CUT OFF) is CPV Positive control. Important notes 1.Please according to use instruction strictly, Do not mix reagents with those from other lots. 2.The kit takes out from the refrigeration environment should be balanced 15-30 minutes in the room temperature then use, ELISA plates coated if has not use up after opened, the plate should be stored in Sealed bag. 3.washing buffer will Crystallization separation, it can be heated the water helps dissolve when dilute. Washing does not affect the result. 4.Closure plate membrane only limits the disposable use, in order to avoid the overlapping pollution 5.The substrate please evade the light preservation. 6.The test result determination must take the microtiter plate reader as a standard, when use dual-wavelength to assay, Reference wavelength is 630nm. 7.All samples, washing buffer and each kind of reject should according to infective material process. Stopp Solution is 2M sulphuric acid. You must pay attention to safe when use. Storage and validity 1. Storage: 2-8 ℃. 2. validity: six months. With an experience of over 30 years, Helper created a new subsidiary who produce bakery and pastry making machines which is applied in the processing of noodles, dumpling, pancake, bread, biscuits, Saqima, hamburgers, pizza, steamed buns, etc. Reliable quality and many patent technologies make Helper`s equipment success in this particular market. Made of stainless steel and meeting all health and hygiene standards is the principle of Helper`s machine designing. Bakery Making Machines,Fresh Noodle Production Line,Vegetable Processing Machines,Pastry Making Machines Helper Machinery Group Co., Ltd. , https://www.helperfoodtek.com
Canine parvovirus (CPV) English manual characterization