[ Zhonghua Wardrobe ] Different styles of sliding wardrobe doors are different, but the size of the general sliding wardrobe doors will not be too different. In order to meet the different needs of consumers, the size of the sliding door can be designed and manufactured by each manufacturer. Designed according to consumer needs. Next, Xiaobian introduces how to detect and push the wardrobe door. How to check the quality of sliding wardrobe door 1, in addition to the closet door can not use transparent glass, other sliding doors can be made of glass, and the quality of the glass will determine the price of the door. It is best to use a tempered glass door, which is not easy to hurt people, and the safety factor is relatively high. 2, push-pull wardrobe door is best to use the 10mm thick sheet, which is more robust, stable and durable. 3, the current market push-pull wardrobe door sheet material, which glass material is more favored by consumers, but when choosing the glass sliding door must pay attention to, the quality of glass material will affect the quality of the glass wardrobe door, if the home If you have children, it is best not to install a glass push-pull sliding wardrobe door, because the glass material push-pull wardrobe door is of high quality, prevent falling, and cause safety hazards. 4, the brand pushes the frame of the wardrobe door, the door panel comes from the same manufacturer, the color pattern can be achieved completely consistent, supporting uniform. The non-branded push-pull wardrobe doors are basically patchwork, and the hardware such as the borders are imported, and the domestically produced plates with similar colors are used, and the consumers who do not understand the market are flickering. 5, the edge of the sliding door is also a factor affecting the quality, good quality edge banding, smooth edges, natural, tight high. At present, the main edge banding strips on the market are pvc rubber and silica gel. This material has strong edge sealing, smooth surface and vivid color. It is not easy to fall off and deform, and there is no phenomenon of chipping. It will not corrode profiles, glass and core. The board damages the door panel structure. Push-pull wardrobe door selection skills 1, look at the sliding door frame At present, the material of the push-pull wardrobe door sold on the market is mainly magnesium-aluminum alloy, aluminum-titanium alloy and recycled aluminum alloy, and the thickness on the quality is generally more than 1 mm, which can satisfy the bearing capacity of the normal wardrobe door. 2, see the sliding door edge Push-pull wardrobe door sealing is an important factor affecting quality. The quality is good, the edges are very smooth, natural, and the flatness and tightness are very high. 3, listening to the track sound of the pulley The pulleys for sliding the wardrobe door are divided into two groups, the upper pulley is mounted on the top of the sliding door, which can play a guiding role, and it is also often the problem here. If it pushes and shakes, and the noise is high, it is best not to buy this sliding door. 4, choose the appropriate rail height The height of the guide rail of the sliding door directly affects the service life and convenience of the wardrobe door. The height of the general guide rail cannot exceed 5 mm, and the clean guide rail should be selected to prevent the wardrobe from being contaminated. 5, the wardrobe door panel should be safe to choose The sliding door of the market has different materials. If you have children at home, it is best not to choose the glass door, because it is easy to be broken by children and easy to get hurt. Editor's summary: About how to check the quality of the sliding door, and how to push and pull the wardrobe door to buy the skills here, I hope to help everyone. Food Trays,Dinner Fork,Food Tray,Round Serving Tray NINGBO HAIFU PLASTIC APPLIANCE CO.,LTD , https://www.hifel.com
How to check the quality of sliding wardrobe door