Excessive formaldehyde and unreasonable structural design are common problems in children's furniture. The finger is pinched, the foot is caught, and the body is overwhelmed... This is not in a dangerous place, but may happen at home! On June 22, Jiangsu Quality Supervision Bureau issued a report on the quality supervision and spot check analysis of children's furniture products. The reporter of the modern express newspaper learned that among the 149 batches of products, over 30% of the unqualified ones. Among them, children's cabinets have the most problems. For example, the handle is relatively pointed and easy to poke the child. The edges of the cabinet are prone to bruises, and the gap is relatively small. The fingers of the child are easily pinched. Children's furniture also has problems with excessive formaldehyde The 149 batches of children's furniture, including children's tables, children's cabinets and children's beds, ranged from 100 yuan to 4,000 yuan. From the test results, children under 1000 yuan have more furniture problems, and 25 out of 47 batches are unqualified, reminding parents to buy carefully. The common problem of furniture is that "formaldehyde" exceeds the standard, and children's furniture also exists. The spot check found that there were problems with 12 batches of products. Wang Haoming, deputy director of the Home Inspection Department of the Quality and Technical Supervision Comprehensive Inspection and Testing Center of Suzhou City, said that wood-based panels are the main material for children's furniture, and adhesives are used in the production of wood-based panels. If you use formaldehyde and paint with excessive formaldehyde, it will cause the formaldehyde in the furniture to exceed the standard. He introduced, in addition, some companies in order to reduce costs, the use of inferior raw materials can also lead to excessive formaldehyde. Sharp corners or projections can hurt your child However, in this sampling, the most serious problem of children's furniture is structural safety. What is structural security? Wang Haoming explained that this means that children's furniture will not be injured due to unreasonable structural design during use. For example, children's nature is lively and active, children's furniture should not have sharp protrusions or tip edges, otherwise the child will be hurt if he does not pay attention to the collision during running and jumping. In this test, there were 7 batches of products with no edges or edges treated, and 2 batches of products with dangerous protrusions. If the pores are not qualified, the fingers of the child will be clipped. Children like to touch everywhere, often accidentally put into a place with holes and gaps, and it is troublesome to reach in and pull out. In order to prevent children's fingers from getting stuck in the holes or gaps of furniture, the national standard requires holes and gaps in children's furniture with a depth of more than 10 mm, and its diameter or gap should be less than 6 mm or more than 12 mm. In addition, if the gap between the moving parts should be less than 5 mm or greater than or equal to 12 mm. That is to say, according to the holes and gaps designed according to this standard, the child's hand can not reach at all, or can enter and exit freely to avoid being pinched. However, this spot check, 13 batches of product gaps did not meet the standard requirements, accounting for 8.7%. Height over 0.6 meters must be fixed or easy to tip over Before the news of IKEA's furniture hurting children, parents worried. There are also 20 batches of products that pose a risk of injury to children. For example, a children's cabinet displayed on the spot, with a little bit of force, will shake back and forth, and it is easy to dump. “Therefore, if the children's cabinet is larger than 0.6 meters, the manufacturer should provide the connecting parts and fix the cabinets on the building. Otherwise, if the cabinet is unstable, or the children climb the cabinet, it is easy to fall over the bruises.†There are no connectors for 20 batches of unqualified products. In addition, Wang Haoming said that children's cabinets under 1.6 meters should not use glass. Otherwise the glass is broken and it is dangerous. When a dog is 10 months old, all teeth will be replaced. Dogs at this stage have a special need to chew, and it is necessary to provide Pet Chew Toys in a timely manner to allow dogs to grind their teeth. Pet Chew Toys,Pet Chewing Dog Toys,Chewing Toys Pet Ball,Pet Teething Toy Mianyang Crossing Cross-Border E-Commerce Co., Ltd. , https://www.wycypets.com
After the dog is 1 year old, you will find that the dog's teeth are white and neat, very strong. Dogs at this stage are already very sensible. When they buy Pet Teething Toy for large dogs, they should pay special attention to the bite resistance of the toys, and choose toys with tough and solid materials.
Chew toys are usually made of natural rubber, and special ingredients are added to improve the cutting resistance and make them less prone to bite. What's more - the chewing texture mimics the feeling of a dog biting its prey and tearing its molars, making dogs instantly fall in love with chew toys. And Chewing Toys Pet Ball are usually designed with different hardness according to the age of the dog to ensure dental and oral health. Chew toys can also grind and clean your teeth. Some Pet Chewing Dog Toys even integrate the functions of a leaking toy, serving multiple purposes with one stone.
Missing food toys can exercise the dog's thinking ability and let him learn to think in the process of trying different ways to get food from toys.
Parents pay attention! These furniture are easy to hurt children