[ China Wardrobe ] When buying a custom closet , do you have such doubts: There is no obvious difference in the appearance of the wardrobe, but why are the prices far apart? In fact, there is a big difference in the materials used in the wardrobe production. In order to reduce costs and obtain more profits, some manufacturers cut corners and cut corners during the production of wardrobes. Consumers need to be careful to distinguish them. The decoration market is mixed, the inferior quality of the poor quality, rough production, and serious defects often enter the market, making it difficult for consumers to distinguish between fake and inferior. Generally, inferior wardrobes have the following serious defects. Consumers should pay attention to the identification when purchasing wardrobes: Customized wardrobe hardware is replaced in the wardrobe installation to replace cheap hardware and cut corners. For example, the counter mirror of a large closet has no back panel, no beading, and is only positioned with a nail. This practice of cutting corners and cutting materials can easily cause the mirror of the counter to be broken. Consumers should carefully observe the wardrobe samples when purchasing the wardrobe and ask for the type and brand of the material. When signing a wardrobe purchase contract, the salesperson is required to indicate the contents according to the introduction. Don't replace the color, type or simple words of the wardrobe with the words “consistent with the factory samplesâ€, so that the signing of the contract is binding, so that the inferior wardrobe manufacturers have no chance. Wardrobe substrate mixing assembly Since the wood-based panel wardrobe adopts a method of veneer decoration on the outside of the substrate, although the parts of the wardrobe cabinet have the same appearance, some of the substrates in the wardrobe are moved by the manufacturer. For example, some wardrobe cabinets and cabinet doors use melamine panels that meet environmental protection and quality requirements, while the cabinet back panels use large core panels with a large amount of formaldehyde emission. Inferior substrate used in wardrobe The use of a substrate that is not dried and worm-like, such a wardrobe has a high moisture content, which is highly likely to cause deformation or cracking after the finished product of the wardrobe. The wardrobe made of decaying or worm-eaten wood will seriously collapse the wardrobe. Making cut-outs in the interior of the closet Since the wood-based panels used in the panel wardrobes are all made of adhesive bonding and are very sensitive to water, their waterproof performance must be ensured by the veneering and edge-sealing treatment of the panels. In order to save costs, some manufacturers do not seal the joint between the inner panel and the panel. Contour Stick,Essence Cushion Sunscreen Makeup SPF 50 Guangzhou Shishi Daily Chemical Co.,Ltd. , https://www.gzcosmeticok.com
Do you have such doubts when purchasing a custom closet?