[ Chinese wardrobe net ] If the size of the custom closet is not good, then there will be problems such as short or long when the clothes are put on, so what is the size of the custom closet? Let's learn. Quilted area: Due to the inconvenience of taking items, the upper end of the closet is usually used to place unusable items such as quilts, which is also good for moisture. The quilt can be placed in the storage box, which is not only dustproof but also easy to take. This area is usually 400-500mm high and 900mm wide; Stacking area: This area can be designed as an adjustable movable layer, which can be changed according to the needs of the height or changed to other areas. For example, when the clothes are increased, the clothes rail can be changed to the upper garment area. This area is mainly used for stacking sweaters, T-shirts, casual pants and other clothing. The height is from the waist to the area between the eyes, which is convenient to take. According to the width of the folded clothes, the width of the cabinet is between 330-400mm and the height is 350-400mm. Long-sleeved area: This area is mainly used for hanging long-sleeved clothes such as windbreakers, coats, down jackets, dresses, and dresses. The width of the long-sleeved area can be designed according to the actual possession of the clothes. Usually, the width of 450mm is enough for one person. For example, a large population can be appropriately widened or designed. The space is not too tight, it is recommended to choose a depth of 600mm, so that hanging clothes will be more comfortable. Height 1400-1500mm, not less than 1300mm; Tops: 1000-1200mm high, this area is used to hang pleated jackets such as suits, shirts, and jackets. For ease of handling, the hanger between the clothes rail and the top of the cabinet should be greater than or equal to 60mm. Depending on the normal length of the garment, the clothes rail to the bottom plate should be greater than 900mm. Note that depending on the height of the individual, the distance from the clothes rail to the ground should not exceed 1800mm and the height should be 1000-1200mm. Drawer: This area is mainly used for storing underwear. Generally, 3 or 4 drawers are designed under the top area, which is mainly used for storing underwear. According to the height of the underwear rolled up, the height of the drawer can not be lower than 190mm, otherwise it is easy to clamp the clothes when closing the drawer, the width is 400-800mm, the height is 190mm; Plaid: The height of the grid is between 160 and 200 mm. Used to store tie, because there is a clip with a fixed tie inside, so there is no need for too much space; Pants rack: The height is 800-1000mm. It is used to suspend trousers and is not easy to wrinkle. The distance from the hanging rod to the bottom plate should not be less than 600mm, otherwise the pants will be dragged to the bottom plate. The above is a small series to bring you about the size of the wardrobe, if you want to make the wardrobe better storage clothes may wish to refer to the reference. This female urogenital system model shows kidney, ureters, urinary bladder, uterus, accessories of uterus, vagina, ovary membrane, ligaments, uterus ligament and its artery etc. Demonstrate the external features of the urogenital system and the internal structures of the kidney, urinary bladder, penis and testicle.Made of PVC plastic. Genitourinary Model,Urinary System Model,Human Genitourinary Model,Genitourinary System Model Xinxiang Vic Science&Education Co.,Ltd. , https://www.hnhumananatomymodel.com
What is the standard size of a custom closet?