[ Chinese wardrobe network ] Now many of the friends in the decoration process have chosen to let the decoration company or go to the whole wardrobe to customize the wardrobe , the process of selection is very confused, do not know how to look at the wardrobe is good or bad, just listen to the staff's introduction It was settled in a confused way. When the wardrobe is done, many friends report that the wardrobe has a taste, or it doesn't take long to be deformed. Why do these things happen? Everyone will come up with quite a material. But what kind of plate is the wardrobe? Now let me introduce you to several kinds of plates. 1. Solid wood plug-in board: The solid wood plug-in board is a relatively good board without considering the cost, but it is already higher, but it is lower than the price of solid wood, and it is not easy to deform and crack at high temperature. Commonly there are six or seven kinds of plates, such as oak plug-in board, ash plug-in board and eucalyptus board. In terms of environmental protection, the plug-in board only needs a little glue in the docking place, compared to the density of wood board. The board is the least used than the glue, so it is relatively environmentally friendly. 2. Blockboard (commonly known as large core board) The blockboard is a core board made of glued wood strips, and then the sheets are thinned on both sides. At present, the thickness of woodboard in China is mostly 20-25mm thick, but the wood board on the market is basically 1.6-2.0mm thick. The characteristics of joinery are the material toughness, strong bearing capacity, not easy to crack, the board body has moisture resistance, strong nail holding power, easy to process, etc., so it is widely used in various fields. The most common types in the market are poplar and fir. Its drawback is that the surface can only be attached with a thin layer of veneer. If the material is not very good, it is easy to have many problems. 3. MDF (fiberboard) MDF is made of wood, branches and so on. After being soaked in water for a period of time, it is made by crushing and pressing wood fiber or other plants. It is divided into high, medium and low according to density. Several. This kind of strength is large, impact resistant, and easy to process, so it is also widely used. 4. Particle board (particle board) The plate is processed by scraps such as branches and sawdust, and has a large amount of glue and low cost. However, the strength is not large, and the amount of formaldehyde is high. Try not to use such plates when making wardrobes. 5. Multilayer board (plywood also called splint) The plywood is also called a thin core board. The plywood is a board made of three or more layers of glue, which is resistant to water and moisture. It has small deformation, large format and strong tensile resistance. It is widely used in cabinets, cabinets, tables and chairs. This kind of sheet is much larger than the wood board, but it is more suitable for the wardrobe than the board. Because the wood board is made of strips of wood strips, the nails are easy to fall off when they hit the seams. The span is not too large, and it is easy to deform when the span is large. Therefore, the multi-layer board is the most furniture most used. Leather Lounge Chair,Lounge Chair Indoor,Modern Lounge Chair,Lounge Chair With Ottoman Foshan City Misirui Furniture Factory Co.,Ltd , https://www.misiruifurniture.com
To understand the quality of the custom closet look at the sheet material